Air Conditioning Line (Peanut) Fitting: Disconnect

WARNING: This page is about a different car, the 2003 Mercury Sable and 2003 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Support the female fitting with a wrench to prevent the tubes from twisting.

Fig 1: Removing Peanut Fitting

Courtesy of FORD MOTOR CO.

Remove the nut from the peanut fitting.
Pull the peanut fitting apart.

Fig 2: Pulling Peanut Fitting
Courtesy of FORD MOTOR CO.

CAUTION: Do not use metal tools to remove the O-ring seal. They can cause axial scratches across the O-ring seal groove, resulting in refrigerant leaks.

Fig 3: Removing O-Ring Seal

Courtesy of FORD MOTOR CO.

Remove the O-ring seal with a non-metallic tool.