LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 466 (Fuel System-General Information) >> General Procedures >> Vapor Tube Fittings - Push Release >> Disconnect

Vapor Tube Fittings - Push Release: Disconnect

WARNING: This page is about a different car, the 2003 Mercury Sable and 2003 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
    WARNING: The evaporative emission system contains fuel vapor and condensed fuel vapor. Although not present in large quantities, it still presents the danger of explosion or fire. Disconnect the battery ground cable from the battery to minimize the possibility of an electrical spark occurring, possibly causing a fire or explosion if fuel vapor or fuel liquid is present in the area.
  1. Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Disconnect the vapor tube from the fitting.
    1. Press the retainer clip in.
    2. Disconnect the vapor tube from the fitting.
      Fig 1: Identifying Vapor Tube Connect To Fitting
      G01576532Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals