Vapor Tube Fittings - Push Release: Connect

WARNING: This page is about a different car, the 2003 Mercury Sable and 2003 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.

Inspect the fitting and the tube for damage.
Remove any dirt or obstructions.
Push the tube into the fitting until it snaps in place.

Fig 1: Identifying Pushing Tube Into Fitting
Courtesy of FORD MOTOR CO.
Pull on the connection to make sure the fitting is secure.

Fig 2: Identifying Connection Of Fitting
Courtesy of FORD MOTOR CO.