Fuel Line Fittings - R-Clip: Connect

WARNING: This page is about a different car, the 2003 Mercury Sable and 2003 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: New R-clips must be used when reconnecting the fitting.

NOTE: Remove any dirt or obstructions.

Inspect the fitting and the tube for damage.
Apply a light coat of engine oil to the male tube end.
Insert the R-clip into the fitting.

Fig 1: Inserting R-Clip Into Fitting
Courtesy of FORD MOTOR CO.
Align the tube and the fitting.

Fig 2: Aligning Tube Into Fitting
Courtesy of FORD MOTOR CO.
Insert the tube in the fitting and push together until a click is heard.

Fig 3: Inserting Tube In Fitting
Courtesy of FORD MOTOR CO.
Pull on the connection to make sure it is fully engaged.

Fig 4: Connecting To Tube And Fitting
Courtesy of FORD MOTOR CO.