LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 466 (Fuel System-General Information) >> General Procedures >> Fuel Line Fittings - Push Connect >> Connect

Fuel Line Fittings - Push Connect: Connect

WARNING: This page is about a different car, the 2003 Mercury Sable and 2003 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the fitting.
    • Lubricate the tube end with engine oil to ease assembly.
    • Align the tube to the fitting and push until a click is heard.
      Fig 1: Aligning Tube To Fitting
      G01576523Courtesy of FORD MOTOR CO.
  2. Install the safety clip.
  1. Pull on the fitting to make sure it is fully engaged.
  2. Install the safety clip.
    Fig 2: Installing Safety Clip
    G01576524Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals