LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 464 (Automatic Transmission External Controls) >> Removal And Installation >> Transmission Selector Lever - Column Shift >> Removal

Transmission Selector Lever - Column Shift: Removal

WARNING: This page is about a different car, the 2003 Mercury Sable and 2003 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the key release lever (3F527).
  2. Remove the ignition switch lock cylinder (11582). For additional information, refer to STEERING COLUMN SWITCHES .
  3. Remove the screws and the lower instrument panel covering.
  4. Remove the upper and the lower steering column shrouds (3530).
  5. Remove the steering column opening weather seal (3513), the transaxle range selector lever pin and the transaxle range selector lever.
  6. Remove the transaxle range selector lever clip.
scientia non olet · About LEMON Manuals