Torque Converter Flushing
WARNING: This page is about a different car, the 2003 Mercury Sable and 2003 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When the transaxle has been repaired for internal damage the torque converter must be cleaned using a mechanically agitated cleaner.
- Using a suitable torque converter/fluid cooler cleaner to clean and flush the torque converter.
- After flushing, drain the remainder of the solvent.
- Add 1.9 liter (2 qt.) of clean transmission fluid to the torque converter and agitate by hand.
- Thoroughly drain the torque converter.