LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 461 (Automatic Transmission - Ax4S) >> In-Vehicle Repair >> Turbine Shaft Speed (TSS) Sensor >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Mercury Sable and 2003 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle on a hoist.
  2. Remove LH front wheel and tire. For additional information, refer to WHEELS & TIRES .
  3. Disconnect the turbine shaft speed (TSS) sensor connector.
    Fig 1: Disconnecting Turbine Shaft Speed Sensor Connector
    G01575048Courtesy of FORD MOTOR CO.
  4. Remove the turbine shaft speed (TSS) sensor.
    Fig 2: Removing Turbine Shaft Speed Sensor
    G01575049Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals