LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 457 (Engine - 3.0L 2V) >> In-Vehicle Repair >> Push Rod >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Mercury Sable and 2003 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rocker arms. For additional information, refer to ROCKER ARM .
    2. NOTE: Identify the location of each push rod. Each push rod must be installed in the original location.
  2. Remove the push rods.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals