LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 456 (Engine System-General Information) >> General Procedures >> Connecting Rod - Piston Pin Side Clearance

Connecting Rod - Piston Pin Side Clearance

WARNING: This page is about a different car, the 2003 Mercury Sable and 2003 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the clearance between the connecting rod and the piston. Verify the measurement is within specification.
    • Refer to the appropriate for the procedure.
    • If out of specification, install new components as necessary. Refer to the appropriate ENGINE article for the procedure.
    Fig 1: Measuring Clearance Between Connecting Rod And Piston
    G01690775Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals