Power Steering Pump To Steering Gear Pressure Line: Installation

WARNING: This page is about a different car, the 2003 Mercury Sable and 2003 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Whenever a hose fitting with a seal is disconnected, a new seal must be installed.

Fig 1: Installing New Seal On Hose fitting

Courtesy of FORD MOTOR CO.

Using the special tool, install a new seal on the hose fitting.
Refer to the appropriate System View illustration in DESCRIPTION AND OPERATION for hose routing and retention points. Refer to SPECIFICATIONS for fastener torque specifications.
Fill and leak check the system. For additional information, refer to STEERING SYSTEM-GENERAL INFORMATION .