LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 447 (Safety Belt System - Excursion & F250-F550 Super Duty) >> Removal And Installation >> Safety Belt Buckle - Rear, Crew Cab >> Removal

Safety Belt Buckle - Rear, Crew Cab: Removal

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Rear bench seat shown, rear captains chair is similar.
  1. Remove the utility tray, if necessary.
  2. Remove the safety belt buckles.
    1. Use the T-55 Torx bit to remove the LH safety belt buckle bolt.
    2. Use the T-55 Torx bit to remove the RH safety belt buckle bolt.
      Fig 1: Removing Safety Belt Buckles Bolts (LH And Rh)
      G01556519Courtesy of FORD MOTOR CO.
  3. Remove the safety belt buckles.
    1. Remove the LH safety belt buckle.
    2. Remove the RH safety belt buckle.
      Fig 2: Removing Safety Belt Buckles (LH And Rh)
      G01556520Courtesy of FORD MOTOR CO.