LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 447 (Safety Belt System - Excursion & F250-F550 Super Duty) >> Removal And Installation >> Safety Belt Buckle - Rear, Crew Cab >> Installation

Safety Belt Buckle - Rear, Crew Cab: Installation

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
    NOTE: Make sure the safety belt webbing is not twisted prior to installation.
    NOTE: Make sure to tighten bolts to specification.
    Fig 1: Installing Safety Belt Buckles Bolts (LH And Rh)
    G01556521Courtesy of FORD MOTOR CO.
  2. Check the restraint system for correct operation.
scientia non olet · About LEMON Manuals