Safety Belt - Rear, Crew Cab: Removal

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Remove the utility tray, if necessary.
Remove the safety belt bolts.
1. Use the T-55 Torx bit to remove the safety belt buckle bolt.
2. Use the T-55 Torx bit to remove the safety belt tongue bolt.
  
  Fig 1: Removing Safety Belt Bolts
  Courtesy of FORD MOTOR CO.
Remove the safety belt.
1. Remove the safety belt buckle.
2. Remove the safety belt tongue.
  
  Fig 2: Removing Safety Belt
  Courtesy of FORD MOTOR CO.