LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 445 (Handles, Locks, Latches And Entry Systems -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Hood Latch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Mark the position of the hood latch.
  2. Remove the hood latch bolts.
    Fig 1: Removing Hood Latch Bolts
    G01556065Courtesy of FORD MOTOR CO.
  3. Disconnect the hood latch release cable from the hood latch.
    • Disconnect the cable conduit.
    • Disconnect the cable.
      Fig 2: Disconnecting Hood Latch Release Cable From Hood Latch
      G01556066Courtesy of FORD MOTOR CO.
  4. Remove the hood latch.
  5. To install, reverse the removal procedure.