LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 445 (Handles, Locks, Latches And Entry Systems -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Door Lock Cylinder >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door trim panel. Refer to INTERIOR TRIM AND ORNAMENTATION .
  2. Remove the exterior front door handle. Refer to Exterior Front Door Handle .
  3. Remove the front door lock cylinder.
    1. Remove the clip.
    2. Remove the lock cylinder.
      Fig 1: Removing Front Door Lock Cylinder
      G01556138Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals