Removal and Installation

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Open the glove compartment.
Release the stops and tilt the glove compartment to the full open position.

Fig 1: Opening Glove Compartment
Courtesy of FORD MOTOR CO.
Remove the eight screws and the glove compartment bin.

Fig 2: Removing Screws And Glove Compartment Bin
Courtesy of FORD MOTOR CO.
Remove the glove compartment latch.
1. Remove the screws.
2. Remove the latch.
  
  Fig 3: Removing Glove Compartment Latch
  Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.