LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 445 (Handles, Locks, Latches And Entry Systems -- Excursion & F250-F550 Super Duty) >> Diagnosis And Testing >> Locks, Latches and Entry Systems - Module Controlled >> Principles of Operation >> Programming/Erasing Personal Code

Programming/Erasing Personal Code

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

A unique personal five-digit code can be programmed by following these steps:

  1. Enter the factory set five-digit code (the keypad will illuminate when pressed).
  2. Press 1/2 within five seconds of Step 1.
  3. Enter the unique five-digit code.

    The personal code does not substitute for the permanent factory set code. Either code can be used to access the vehicle. In addition, if a second personal code is programmed, it will simply overwrite the previous personal code. To erase a personal code, carry out the following procedure:

  4. Enter factory set five-digit code.
  5. Press 1/2 within five seconds of Step 1.
  6. Press 7/8 and 9/0 at the same time within five seconds of Step 2.

    The system will now only respond to the factory set code.

scientia non olet · About LEMON Manuals