LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 445 (Handles, Locks, Latches And Entry Systems -- Excursion & F250-F550 Super Duty) >> Diagnosis And Testing >> Locks, Latches and Entry Systems - Module Controlled >> Principles of Operation >> Deactivating/Activating Power Door Unlock Switch Inhibit

Deactivating/Activating Power Door Unlock Switch Inhibit

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

This is customer configurable. Steps one through three must be completed within 30 seconds.

  1. Turn the ignition key to ON, then press UNLOCK three times.
  2. Turn the ignition key to OFF, then press UNLOCK three times.
  3. Turn the ignition key to ON, within five seconds press LOCK two times.

The user will receive two horn chirps to indicate the system has been disabled or two chirps followed by a horn honk to indicate the system has been enabled.

Pressing LOCK two times again will toggle the door lock control switch inhibit feature state.

Turn the ignition OFF to exit programming mode.

This feature can also be enabled/disabled using a diagnostic tool.