LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 442 (Seat System -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Seat Latch - SuperCab, Rear >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat. Refer to REAR SEAT - SuperCab .
    NOTE: The 40 percent seat is shown. The 60 percent seat is similar.
  2. Remove the bolts.
    Fig 1: Removing Bolts
    G01555664Courtesy of FORD MOTOR CO.
  3. Remove the bolt, and remove latch shield.
    Fig 2: Removing Latch Shield Bolts
    G01555665Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals