Seat Armrest - Captain's Chair With Seat Integrated Restraints (SIR): Installation
WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
To reduce the risk of serious personal injury, read and follow all warnings, cautions, and notes at the beginning of the disassembly procedure.
- Attach the armrest.NOTE: SIR seat has slide spacer on end of bolt.
- Position the armrest on the seat backrest. Install the armrest attachment bolt.
- Restore the armrest fabric over the pivot end of the armrest.
- Install the seat in the vehicle. Refer to FRONT SEAT - With Seat Integrated Restraints (SIR) .
- Reactivate the supplemental restraint system (SRS). Refer to Supplemental Restraint System (SRS) Deactivation and Reactivation .WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes and instructions in the supplemental restraint system (SRS) deactivation/reactivation procedure.
- With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS). Refer to AIR BAG RESTRAINT SYSTEMS
.WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from the vehicle prior to road use. Failure to remove could result in injury and possible violation of vehicle safety standards.
- Check the active restraints for correct operation. Refer to SAFETY BELT SYSTEM .