LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 442 (Seat System -- Excursion & F250-F550 Super Duty) >> Disassembly And Assembly >> Rear Seat Cushion - SuperCab >> Disassembly and Assembly

Disassembly and Assembly

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat. Refer to REAR SEAT - SuperCab .
    NOTE: The 60 percent seat is shown. The 40 percent seat is similar.
  2. Remove the latch. Refer to SEAT LATCH - SuperCab, Rear .
  3. Unclip the J-clip.
    Fig 1: Uncliping J-Clip
    G01555730Courtesy of FORD MOTOR CO.
  4. Remove the upholstery.
    Fig 2: Removing Upholstery
    G01555731Courtesy of FORD MOTOR CO.
  5. Remove the seat cushion foam pad from the frame.
  6. To assemble, reverse the disassembly procedure.
scientia non olet · About LEMON Manuals