Rear Seat Backrest - Crew Cab: Disassembly

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Remove the seat back. Refer to REAR SEAT BACKREST - Crew Cab .
Remove the two armrest bracket bolts, if so equipped, to remove armrest from the back assembly.

Fig 1: Removing Two Armrest Bracket Bolts
Courtesy of FORD MOTOR CO.
Unzip armrest cover and remove from the armrest.

Fig 2: Unzipping Armrest Cover
Courtesy of FORD MOTOR CO.
Unfasten the seat back cover J-clips and remove the cover.

Fig 3: Unfastening Seat Back Cover J-Clips
Courtesy of FORD MOTOR CO.
Remove the seat back cushion foam pad from the seat back frame.

Fig 4: Removing Seat Back Cushion Foam Pad From Seat Back Frame
Courtesy of FORD MOTOR CO.
Remove the four armrest bolts and remove armrest brackets.

Fig 5: Removing Armrest Bolts
Courtesy of FORD MOTOR CO.