Removal and Installation

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Remove the RH cowl vent grille. Refer to FRONT END BODY PANELS .
Remove the antenna base.
1. Remove the radio antenna mast (18A886).
2. Remove the screws.
3. Remove the antenna base.
  
  Fig 1: Removing Antenna Base
  Courtesy of FORD MOTOR CO.
Disconnect the radio antenna lead-in cable.

Fig 2: Disconnecting Radio Antenna Lead-In Cable
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.