Removal and Installation

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Remove the parking aid sensor and bezel.
1. Disconnect the electrical connector.
2. Release the locking tabs on the sensor bezel.
3. Remove the parking aid sensor and bezel.
  
  Fig 1: Removing Parking Aid Sensor And Bezel
  Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.