Belt Minder Deactivating/Activating: Preparation
WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Before deactivating/activating the belt minder, set the parking brake.
- Place gearshift in P (Park) (automatic transmission) or the neutral position (manual transmission).
- Place the ignition switch in the OFF position.
- Close all the vehicle doors.
- Unbuckle the driver safety belt
- Place the parklamps/headlamps switch in the OFF position.