LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 423 (Instrument Cluster System - Excursion & F250-F550 Super Duty) >> Removal And Installation >> Instrument Cluster >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel cluster finish panel. Refer to INSTRUMENT PANEL AND CONSOLE .
  2. Lower the steering wheel tilt adjustment.
  3. Remove the four instrument cluster screws and pull the instrument cluster away from the instrument panel.
  4. Disconnect the electrical connectors.
    Fig 1: Removing Four Instrument Cluster Screws
    G01555075Courtesy of FORD MOTOR CO.
  5. If equipped, disconnect the transmission range indicator.
    • Push in the two clips and pull out the transmission range indicator. Position the indicator aside and remove the instrument cluster.
      Fig 2: Pulling Out Transmission Range Indicator
      G01555076Courtesy of FORD MOTOR CO.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals