LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 414 (Engine Cooling System - Excursion & F250-F550 Super Duty Pickup) >> Removal And Installation >> Block Heater - 7.3L Diesel Engine >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the cooling system. Refer to Cooling System Draining, Filling and Bleeding .
  2. Raise and support the vehicle.
  3. Disconnect the electrical connector from the block heater.
    Fig 1: Disconnecting Electrical Connector From Block Heater
    G01549928Courtesy of FORD MOTOR CO.
  4. Remove the block heater from the oil cooler.
    Fig 2: Removing Block Heater From Oil Cooler
    G01549929Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals