LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 413 (Engine - 6.8L) >> In-Vehicle Repair >> Crankshaft Front Oil Seal >> Removal

Crankshaft Front Oil Seal: Removal

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the crankshaft pulley. Refer to Crankshaft Pulley .
  2. Using the special tool, remove the crankshaft front oil seal.
    Fig 1: Removing Crankshaft Front Oil Seal Using Special Tool
    G01544624Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals