LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 412 (Engine - 5.4L 2V) >> In-Vehicle Repair >> Hydraulic Lash Adjuster >> Installation

Hydraulic Lash Adjuster: Installation

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the valve tappets in their original locations.
    Fig 1: Installing Valve Tappets Original Locations
    G01548353Courtesy of FORD MOTOR CO.
  2. Install the camshaft roller followers. Refer to Camshaft Roller Follower .
scientia non olet · About LEMON Manuals