Valve Spring Strength

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Special Tool(s)

Fig 1: Identifying Special Tool

Courtesy of FORD MOTOR CO.

Use a Valve/Clutch Spring Pressure Gauge to check the valve spring for correct strength at the specified valve spring length.
- Refer to the appropriate article in ENGINE for the procedure.
- If out of specification, install new components as necessary. Refer to the appropriate article in ENGINE for the procedure.

Fig 2: Checking Valve Spring For Correct Strength At Specified Valve Spring Length

Courtesy of FORD MOTOR CO.