LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 411 (Engine System - General Information - Excursion & F250-F550 Super Duty Pickup) >> General Procedures >> Valve - Guide Inner Diameter

Valve - Guide Inner Diameter

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the inner diameter of the valve guides in two directions where indicated.
    • Refer to the appropriate article in ENGINE for the procedure.
    Fig 1: Measuring Inner Diameter Of Valve Guides In Two Directions Where Indicated
    G02704526Courtesy of FORD MOTOR CO.
  2. If the valve guide is not within specifications, ream the valve guide and install a valve with an oversize stem or remove the valve guide and install a new valve guide.