Piston - Diameter

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

Measure the piston diameter 90 degrees from the piston pin at the point indicated. Refer to the appropriate article in ENGINE for the procedure.
- If out of specification, install new components as necessary. Refer to the appropriate article in ENGINE for the procedure.

Fig 1: Measuring Piston Diameter 90 Degrees From Piston Pin At Point Indicated

Courtesy of FORD MOTOR CO.