LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 411 (Engine System - General Information - Excursion & F250-F550 Super Duty Pickup) >> General Procedures >> Connecting Rod - Bushing Diameter

Connecting Rod - Bushing Diameter

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the inner diameter of the connecting rod bushing, if equipped. Verify the diameter is within specification.
    • Refer to the appropriate article in ENGINE for the procedure.
    • If out of specification, install new components as necessary. Refer to the appropriate article in ENGINE for the procedure.
Fig 1: Measuring Inner Diameter Of Connecting Rod Bushing
G02704510Courtesy of FORD MOTOR CO.