LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 408 (Steering Linkage -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Sector Shaft Arm Drag Link - F-250, F-350, 4x4, and F-450, F-550 >> Installation

Sector Shaft Arm Drag Link - F-250, F-350, 4x4, and F-450, F-550: Installation

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, and 2003 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Follow the removal procedure in reverse order.
    • Install a new cotter pin.
      Fig 1: Tightening Adjusting Sleeve Clamp
      G01543710Courtesy of FORD MOTOR CO.
      Fig 2: Installing New Cotter Pin
      G01543711Courtesy of FORD MOTOR CO.
  2. Check the toe-in and clear vision settings; Refer to SUSPENSION SYSTEM-GENERAL INFORMATION .