LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 408 (Steering Linkage -- Excursion & F250-F550 Super Duty) >> Removal And Installation >> Damper - F-250, F-350, 4x4, and F-450, F-550 >> Removal

Damper - F-250, F-350, 4x4, and F-450, F-550: Removal

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, and 2003 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The procedure for the Super Duty F-250, F-350 4x2 steering damper is similar.
  1. Position and lock the wheels in the straight-forward position. Raise and support the vehicle.
  2. Remove the bolt and nut.
    Fig 1: Removing Bolt And Nut
    G01543690Courtesy of FORD MOTOR CO.
  3. Remove the bolt and nut. Remove the damper.
    Fig 2: Removing Damper
    G01543691Courtesy of FORD MOTOR CO.