Rear Wheel Speed Sensor: Removal
WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the battery ground cable. Refer to BATTERY, MOUNTING & CABLES .
- Raise and support the vehicle.
- Remove the rear anti-lock brake sensor.
- Disconnect the electrical connector.
- Remove the bolt.
- Remove the rear anti-lock brake sensor.
CAUTION:
Clean off dirt and debris that may have collected around the rear anti-lock brake sensor before removal to prevent fluid contamination.