Torque Specifications: 5R110W
WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, and 2003 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS (TRANSMISSION - 5R110W)
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Center Support Fluid Feed Bolts | 24 (33) | |
| Coast Clutch Hub-To-Overdrive Carrier | ||
| Step 1 | 18 (25) | |
| Step 2 | Additional 90 Degrees | |
| Cooler Line Fitting-To-Case | 35 (48) | |
| Extension Houding-To-Case | 35 (47) | |
| Fluid Pan Drain Plug | 13 (18) | |
| Front Support-To-Fluid Pump | 21 (29) | |
| Output Shaft Flange Bolt | 110 (150) | |
| Output Shaft Retaining Nut | 148 (200) | |
| Parking Pawl Abutment-To-Case | 18 (25) | |
| Parking Rod Guide Plate-To-Case | 18 (25) | |
| Power Take Off Plate-To-Case | 30 (40) | |
| Pump Body-To-Case | 20 (27) | |
| Shift Cable Bracket | 30 (40) | |
| Torque Converter-To-Flexplate Nuts | 26 (35) | |
| Transmission Flexplate Cover | 26 (35) | |
| Transmission Fluid Cooler Tube Nut At Case | 30 (40) | |
| Transmission Pan-To-Case | 11 (15) | |
| Transmission Rear Mount | 69 (94) | |
| Transmission Support Crossmember-To-Frame | 60 (81) | |
| Transmission-To-Engine | 35 (47) | |
| INCH Lbs. (N.m) | ||
| Fill Tube-To-Engine | 89 (10) | |
| Line Pressure Plug-To-Case | 108 (12) | |
| Output Shaft Speed Sensor | 80 (9) | |
| Solenoid Body & Ditch Plate-To-Case | 89 (10) | |
| Solenoid Body-To-Case | 89 (10) | |
| Transmission Range Sensor-To-Case | 89 (10) | |
| Turbine Shaft & Intermediate Shaft Speed Sensor | 80 (9) | |