LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 2906 (Supplemental Restraint System) >> Diagnosis And Testing >> Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) >> Pinpoint Test - Supplemental Restraint System (SRS) >> Pinpoint Test AD: DTCs B0001:4A, B0002:4A, B0004:4A, B0010:4A, B0011:4A, B0020:4A, B0021:4A, B0028:4A, B0029:4A, B0050:4A, B0052:4A, B0090:4A, B0091:4A, B0092:4A, B0095:4A, B0096:4A, B0097:4A, B00B5:4A, B00D5:4A, B1211:4A, B1214:4A and U3000:4A >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The Restraints Control Module (RCM) monitors all of Supplemental Restraint System (SRS) device connections. If the RCM detects a connection or device connected that is not stored in memory or is not configured for the component, the RCM will set a DTC and send a message to the Instrument Panel Cluster (IPC) to illuminate air bag warning indicator.

DTC DESCRIPTION TABLE

DTC Description Fault Trigger Condition
  • B0001:4A - Driver Frontal Stage 1 Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM detects the device but it is not configured for this component.
  • B0002:4A - Driver Frontal Stage 2 Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM detects the device but it is not configured for this component.
  • B0004:4A - Driver Knee Bolster Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM detects the device but it is not configured for this component.
  • B0010:4A - Passenger Frontal Stage 1 Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM detects the device but it is not configured for this component.
  • B0011:4A - Passenger Frontal Stage 2 Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM detects the device but not configured, will set this DTC.
  • B0020:4A - Left Side Airbag Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM detects the device but it is not configured for this component.
  • B0021:4A - Left Curtain Deployment Control: Signal Cross Coupled
 This DTC will set if the RCM detects the device but it is not configured for this component.
  • B0028:4A - Right Side Airbag Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM detects the device but it is not configured for this component.
  • B0029:4A - Right Curtain Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM detects the device but it is not configured for this component.
  • B0050:4A - Driver Seatbelt Sensor: Incorrect Component Installed
 This DTC will set if the RCM detects the device but it is not configured for this component.
  • B0052:4A - Passenger Seatbelt Sensor: Incorrect Component Installed
 This DTC will set if the RCM detects the device but it is not configured for this component.
  • B0090:4A - Left Frontal Restraints Sensor 1: Incorrect Component Installed
 This DTC will set if the RCM detects the device but it is not configured.
  • B0091:4A - Left Side Restraints Sensor 1: Incorrect Component Installed
 This DTC will set if the RCM detects the device but it is not configured for this component.
  • B0092:4A - Left Side Restraints Sensor 2: Incorrect Component Installed
 This DTC will set if the RCM detects the device but it is not configured.
  • B0095:4A - Right Frontal Restraints Sensor: Incorrect Component Installed
 This DTC will set if the RCM detects the device but it is not configured for this component.
  • B0096:4A - Right Side Restraints Sensor 1: Incorrect Component Installed
 This DTC will set if the RCM detects the device but it is not configured.
  • B0097:4A - Right Side Restraints Sensor 2: Incorrect Component Installed
 This DTC will set if the RCM detects the device but it is not configured for this component.
  • B00B5:4A - Driver Seat Track Position Restraints Sensor: Incorrect Component Installed
 This DTC will set if the RCM detects the device but it is not configured for this component.
  • B00D5:4A - Restraint System Passenger Disable Indicator: Incorrect Component Installed
 This DTC will set if the RCM detects the device but it is not configured for this component.
  • B1211:4A - Driver Seatbelt Retractor Pretensioner Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM detects the device but it is not configured for this component.
  • B1214:4A - Passenger Seatbelt Retractor Pretensioner Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM detects the device but it is not configured for this component.
  • U3000:4A - Control Module: Incorrect Component Installed
 If the RCM detects the incorrect vehicle identification or model year identification from the Occupant Classification System Module (OCSM), PCM or ABS module, this DTC will set.

This pinpoint test is intended to diagnose the following: 

scientia non olet · About LEMON Manuals