Clutch Pedal Position (CPP) Switch

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, and 2003 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect batter ground cable. Disconnect CPP switch electrical connector. Pull down on CPP switch retaining clip and slide CPP switch toward driver seat. Remove plastic retainer on top of CPP switch by pushing locking tabs together and sliding retainer forward. Remove CPP switch from clutch pedal rod and remove CPP switch. To install, reverse removal procedure.