Removal & Installation
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Ford Pickup, 2004 Ford F550 Super Duty, 2004 Ford F450 Super Duty, 2004 Ford Excursion, and 2003 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect battery ground cable. Disconnect CPP switch electrical connector. Pull down on CPP switch retaining clip and slide CPP switch toward driver seat. Remove plastic retainer on top of CPP switch by pushing locking tabs together and sliding retainer forward. Remove CPP switch from clutch pedal rod and remove CPP switch. To install, reverse removal procedure.