LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 2720 (Supplemental Restraint System) >> Diagnosis And Testing >> Air Bag and Safety Belt Pretensioner Supplemental Restraint System (SRS) >> Pinpoint Test - Restraints Control Module (RCM) >> Pinpoint Test AA: DTCs B0001:4A, B0002:4A, B0010:4A, B0011:4A, B0020:4A, B0021:4A, B0028:4A, B0029:4A, B0050:4A, B0052:4A, B0090:4A, B0091:4A, B0092:4A, B0095:4A, B0096:4A, B0097:4A, B00B5:4A, B00D5:4A, B1211:4A, B1212:4A, B1213:4A, B1214:4A and U3000:4A >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

The Restraints Control Module (RCM) monitors all of Supplemental Restraint System (SRS) device connections. If the RCM  detects a connection or device connected that is not stored in memory, the RCM  will set a DTC and send a message to the Instrument Cluster (IC) module to illuminate air bag warning indicator.

DTC DESCRIPTION CHART

DTC Description Fault Trigger Conditions
  • B0001:4A - Driver Frontal Stage 1 Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B0002:4A - Driver Frontal Stage 2 Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B0010:4A - Passenger Frontal Stage 1 Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B0011:4A - Passenger Frontal Stage 2 Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B0020:4A - Left Side Airbag Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B0021:4A - Left Curtain Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B0028:4A - Right Side Airbag Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B0029:4A - Right Curtain Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B0050:4A - Driver Seatbelt Sensor: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B0052:4A - Passenger Seatbelt Sensor: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B0090:4A - Left Frontal Restraints Sensor 1: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B0091:4A - Left Side Restraints Sensor 1: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B0092:4A - Left Side Restraints Sensor 2: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B0095:4A - Right Frontal Restraints Sensor: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B0096:4A - Right Side Restraints Sensor 1: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B0097:4A - Right Side Restraints Sensor 2: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B00B5:4A - Driver Seat Track Position Restraints Sensor: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B00D5:4A - Restraint System Passenger Disable Indicator: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B1211:4A - Driver Seatbelt Retractor Pretensioner Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B1212:4A - Driver Seatbelt Buckle Pretensioner Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B1213:4A - Passenger Seatbelt Buckle Pretensioner Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • B1214:4A - Passenger Seatbelt Retractor Pretensioner Deployment Control: Incorrect Component Installed
 This DTC will set if the RCM  detects the device but it is not configured for this component.
  • U3000:4A - Control Module: Incorrect Component Installed
 If the RCM  detects the incorrect vehicle ID or model year ID from the Occupant Classification System Module (OCSM), PCM or ABS module, will set this DTC.

This pinpoint test is intended to diagnose the following: 

scientia non olet · About LEMON Manuals