Removal And Installation

All side window glass assemblies 

1. Remove the quarter trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION article.

Moveable side window glass assembly and latches only 

2. Position the moveable side glass latches aside.
   1. Remove the 2 screws.
   2. Remove the window latch shim.
   3. Remove the window latch anchor plate.
   4. Rotate the latch so that it is clear of the body.
Fig 1: Side Glass Latches & Screws
Courtesy of FORD MOTOR CO.

Moveable side window glass assembly and hinges only 

3. Remove the 10 glass retaining nuts.
Fig 2: Glass Retaining Nuts
Courtesy of FORD MOTOR CO.

Moveable side window glass hinges only 

4. Release the moveable window glass latches.
CAUTION: Do not allow the moveable side window glass assembly to fall out of the opening.
5. Distance the moveable window glass assembly from the body.
6. Remove the 2 hinge retaining nuts and the 2 hinges.
Fig 3: Hinge & Retaining Nuts
Courtesy of FORD MOTOR CO.

Moveable side window glass latches only 

7. Remove the moveable side window glass latch.
   1. Remove the nut.
   2. Remove the gasket.
   3. Remove the latch.
   4. Remove the gasket.
   5. Remove the spacer.
Fig 4: Moveable Side Window Glass Latch, Gaskets, Spacer & Nut
Courtesy of FORD MOTOR CO.

Fixed side window glass assembly only 

8. Remove the 14 glass retaining nuts.

Quarter window glass assembly only 

9. Remove the 8 glass retaining nuts.

All side window glass assemblies 

10. Remove the window glass assembly from the vehicle.
11. To install, reverse the removal procedure.
    • Check the glass for correct sealing and operation.