Seat Belt PRETENSIONERS: Installation
WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- To install, reverse removal procedure. Remove seat belt pretensioner simulator from harness connector and reconnect connectors. DO NOT activate air bag system at this time. Tighten seat belt pretensioner anchor and mounting bolts to specification. See TORQUE SPECIFICATIONS .
- With seat belt pretensioner installed, connect negative battery cable. With air bag simulators installed at all remaining deployable devices, perform system operation check. See SYSTEM OPERATION CHECK . Activate air bag system. See ACTIVATING SYSTEM under DISABLING & ACTIVATING AIR BAG SYSTEM.