Removal And Installation
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
It is not necessary to remove the audio unit in order to retrieve the part number. For additional information, refer to Audio Unit Part Number Retrieval in this article.
- Remove the instrument cluster finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
- Remove the 4 screws and the audio unit.
- Disconnect the electrical connector and the antenna lead-in cable.
- To install, reverse the removal procedure.