LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 219 (Supplemental Inflatable Restraint System) >> Disabling & Activating Air Bag System >> Activating System >> Diagnostics Activating Procedure (Seats Installed)

Diagnostics Activating Procedure (Seats Installed)

WARNING: This page is about a different car, the 2003 Mercury Sable and 2003 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable and wait at least one minute. Remove air bag simulators from right and left pretensioner harness connectors and reconnect connectors. On models equipped with side air bags, remove air bag simulators from right and left side air bag module harness connectors and reconnect connectors.
  2. Remove air bag simulator from passenger-side air bag module harness connector. Install dual stage passenger-side air bag. Remove air bag simulator from clockspring harness connector and reconnect connectors. Install lower steering column opening cover with reinforcement and tighten bolts to specification. See TORQUE SPECIFICATIONS  . Connect negative battery cable. Perform system operation check. See SYSTEM OPERATION CHECK  . Perform computer relearn procedure. See COMPUTER RELEARN  . Reprogram pre-set radio frequencies and set clock.
scientia non olet · About LEMON Manuals