LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Engine Controls - Removal & Installation - 6.0L (99P F450/550) Diesel) >> Emission Systems & Sub-Systems >> Exhaust Gas RECIRCULATION Valve >> Removal

Exhaust Gas RECIRCULATION Valve: Removal

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect EGR valve electrical connector and charge air cooler tube. Remove intake adapter. See Figure.
  2. Remove throttle plate adapter. See Figure.
  3. CAUTION: Do not pull EGR valve out or damage to EGR valve will occur.
  4. Remove bolts and rotate EGR valve counterclockwise. See Figure. Install EGR Remover and remove EGR. See Figure.
  5. Remove and discard EGR "O" rings. Vacuum out ash and foreign material from inside the intake manifold.