Removal & Installation (3.0L 2V)
WARNING: This page is about a different car, the 2003 Mercury Sable and 2003 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
Remove spark plug wires. See SPARK PLUG WIRES . Loosen spark plugs one quarter turn then use compressed air to remove any foreign material in the spark plug well before removing spark plugs. Remove spark plugs. Check and adjust gap to.042-.046" (1.07-1.17 mm). To install, reverse removal procedure. Tighten spark plugs to specification. See TORQUE SPECIFICATIONS .