Removal & Installation
WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect negative battery cable. Disconnect Idle Air Control (IAC) valve electrical connector. Disconnect throttle by-pass hose. Remove 2 bolts and IAC valve. See Fig 1. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .