LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Taurus SES, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 209 (Engine Controls - Removal & Installation - Excursion & F250-F550 Super Duty Pickup - Gasoline) >> Fuel Systems >> Fuel Line Connectors >> Push Connect Coupling

Push Connect Coupling

WARNING: This page is about a different car, the 2003 Ford Pickup, 2003 Ford F550 Super Duty, 2003 Ford F450 Super Duty, 2003 Ford Excursion, and 2003 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Disconnect safety clip from male hose. See Fig 1. Install Fuel Line Disconnect (T90T-9550-S) and push it into fitting. Separate fittings.
  2. Before installation, lubricate tube end with clean engine oil. Align tube to fitting and push until a click is heard. Pull on fitting to ensure engagement. Install safety clip.
Fig 1: Disconnecting Fuel Lines With Push Connect Coupling
G99E02483Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals